3/16" Clear Base Glass

 

 

 

High flame above

Low flame below

Clear base with evergreen reflective above and below.

clean and paint

and the final step, pour and light.

Clear base with Blue Green on top.

Below is a fire pit with a clear base with azurlite and starfire on top

Above, this is how most fireplaces start

Below is a clear base with a double burner

Again this is how most fireplaces look after you remove the doors and or screens

and below is a clear base with blue over the top

Below is a clear base with coral orange topping as a topper

Above is a clear base with coral orange topping

The pictures below are of John Hanson in Northern California and he did a pan burner we provided and installed it himself.

A clear base with 3/4" clear on top

Here is how it all started

The bottom of the pan goes in

The top goes on and you light it

Now the glass

and now the magic

This is how the pan started

There you have it, simple as that. Great job John Hanson!

The 3 lower pictures have a clear base with Ice on top. This fireplace also has a new surround frame that we now manufacture also found in the Surrounds page.

The fire place below has clear. azurlite and azurlite reflective.

The 2 pictures below are a clear base with a dash or plum topping.

The fireplace below has clear, gold and black. A little drywall and paint and here you have one cool fireplace!

The fire pit below has clear, starfire, amber topping, amber topper and dark red orange topper.

The fire pit below has clear with our very own ICE!

The fire pit below had clear and one really cool flame effect!

This is in Etiwanda California

Here is a fireplace before and after with clear

The fireplace below has clear installed and had a double burner which was converted to a triple for more flame effect.

Click "HERE" or on the picture below to see how this started and finished, very simple and very nice

The fireplace below has clear installed

The 4 pictures below are all clear glass

The 6 pictures below show a self install with all glass using the original burner which didn't have a bad flame pattern. 1/8" clear was used as a base and then starfire was added to the surface saving money and it did look great. It's a simple as that.

This is in Yorba Linda California with a stainless steel surround and clear glass.

The 2 fireplaces below are the same fireplace! This fireplace started out with a brick face and clear glass

After a little black granite and some clear ice, we have a very nice fireplace!

This fireplace belongs to Carl Herkes

The fireplace below has a clear base with bronze on top

The fireplace below has red and a clear base

This next self install is a 10 picture install with :

Azurlite, Clear, Blue Green, Blue Green Reflective, Ice Clear, Ice Blue. Very nice fireplace.

The pictures below are of a self install fire pit with crushed lava rock and a clear base

1/2" to 3/4" lava rock is use just to the bottom of the ring.

If you want a higher center then pour a little more filler on top of the ring.

Now we will pour the crushed lava rock (1/4" to 3/8") over the filler as this will stop the glass from falling through the lava rock.

Finish shaping and pour the glass

This is a 36" fire pit which requires 56 lbs for a 1" cover and 80 lbs for a 1 1/2" cover.

We used the 1" method, 56 lbs which as you can see works just fine and no you can't see though the glass.

The second step will be to add color and toppers which we should post in a few days and night time pictures with the fire on

If you have been told to use more glass than 1" or 1 1/2" of glass over the crushed lava rock, then someone was trying to line their pockets with your money.

The fire pit below has a clear base with azurlite and ford blue on top. Then it was topped with Dark Red Orange Topper, Yellow Amber Topper and Amber Topping.

This fire pit has clear, chunky clear, starfire and 1/2 starfire and a water fall going into the fire, pretty cool!

The fire pit below has a clear base with 1/4" starfire and 1/2" starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper. The earth as the back yard and a lot of friends, wow!

The fire pit below has an electronic ignition and clear glass installed. This is next to the San Diego Stadium Downtown San Diego at the "Legends" Again this was installed by Cesar, one of our dealers in San Diego.

The fire pit below was built and installed with clear base glass. Again by Cesar in San Diego.

 

The next fire pit was designed by and built for Kevin Leys of Chicago. He did a great job and you decide.

First he started with a single wall construction fire box with a pan on the top

Then it was framed for exterior plywood or you could use metal studs and wonder board.

The gas valve was located to the outer framed wall

This is a natural gas fire pit. It was tested as soon as it turned dark, fun!

Now we add the crushed lave rock and glass over that. There are many sub materials you can use as a filler. Just ask.

Great back your by the way! Chicago, remember?

Now we start to apply the tile for the finishing touch.

The fire pit below is in Glendale, Arizona at the Renaissance Hotel. We installed an electronic ignition with a 30" stainless steel ring. The glass use was a clear base with starfire on top and topped with 42 lbs of apricot topper. These pictures were taken with the edges still exposed which were covered by a layer of starfire.

 

 The fireplace below is a propane fireplace with a propane burner and remote control. We used a clear base with starfire on top. Then we added:

Medium Amber Topping,

Yellow Amber Topper,

Steel Blue Topper,

Dark Red Orange Topper over the base glass. The controls were covered after the install was finished. If you look closely you can see the pilot light assembly.

 The fireplace below is a propane fireplace. A bed of crushed lava was installed and a clear base glass was used to cover it all up.